Cable Hunter

This blade was forged from the same 1 1/4" x 12" cable as the last knife posted. It measures 9 3/8" overall, and has a 5 1/4" blade. The handle slabs are giraffe bone with combination brass/copper pins. The sheath is my usual 8 oz veg. tanned cowhide.

Shelf Brackets

Steel is 3/8" for the square and round part of the piece, 1/4 tapered vine to a copper leaf. There are 4 at 8" high, and 4 at 7 1/2".

First Cable Knife

This is my first attempt at forging cable. The cable started at 1 1/4", blade is 5 1/2", overall length is 9 3/4", the spine is 1/8" tapering both to the point and through the tang. The handle is elk antler secured with pins that are a combination of copper and brass. Sheath is my usual 8 oz. veg. tanned cow hide.

Small Hunting Knife

This knife measures 6 5/8" in overall length and has a 3/32" thick straight tapered blade forged from 1095. The handle is ebony with 1/16" brass pins. The "guard" area has been peened over for a nice comfortable feel.

Mama's New Kitchen Knife

This one is for my mom's birthday. Forged 1095 piece is 12.5" overall with an 8 1/4" blade, has a pewter bolster, octagonal curly maple handle with 1/16" steel pins. The thin blade slices hot bread with ease.

Damascus Hunter

I took the previously posted 10 layer billet and made it a 20. The blade is 4" and the overall length is 8.5". The handle is ebony with steel pins, same damascus for the guard and pommel, and the sheath is vegetable tanned cow hide.

Damascus in the Works

Started with 5 layers(pic1), forge welded and drawn out. Cut this in half(pic2), forge welded, drawn out, and twisted. Pic3 is its current state(10 layer) with a quick etch. I'm thinking cut/weld/twist one more time before forging it to a blade. This would make it a 20 layer. Currently 4 hours into this with coal forge and no power hammer, but so far so good on the welds.