Damascus Hunter

I took the previously posted 10 layer billet and made it a 20. The blade is 4" and the overall length is 8.5". The handle is ebony with steel pins, same damascus for the guard and pommel, and the sheath is vegetable tanned cow hide.

Damascus in the Works

Started with 5 layers(pic1), forge welded and drawn out. Cut this in half(pic2), forge welded, drawn out, and twisted. Pic3 is its current state(10 layer) with a quick etch. I'm thinking cut/weld/twist one more time before forging it to a blade. This would make it a 20 layer. Currently 4 hours into this with coal forge and no power hammer, but so far so good on the welds.

Multi Layer/Pattern Welded Knife

This is my first successful multi layer blade. I started with about 1"x1/8"x4" pieces of wrought iron/15n20/1084/15n20/ wrought iron. The knife has a 7 1/2" blade, is almost 11 3/4" overall, and is an 1/8"- at the spine. No power hammer or fancy belt grinder yet, so this was a lot of hammering, filing, and sanding. Sheath was made with vegetable tanned cow hide and waxed linen thread, wet formed and dyed dark.